Parts we make for mining OEMs
- Mill pinions and pinion shafts; girth gear segments to drawing
- Crusher countershafts and drive gears
- Apron and grizzly feeder gearing
- Conveyor drive gears, shafts and complete reducers
- Hoist and winder gearing
- Spares for discontinued models in your installed base
Why mining OEMs use us
- Large diameters and long shafts in small quantities
- Reverse engineering of legacy parts with no drawing
- Experience with mine-site failures, from 40+ years of gearbox repair
- Canadian and northeastern US locations close to North American mines and service centres
Supporting your installed base
Many mining OEMs now build new machines outside North America but still support a large fleet here. We make the gears and shafts for that fleet locally, to your drawings or from the worn part.
Capacity at a glance
| Capability | Range |
|---|---|
| Gear diameter (hobbing and grinding) | up to 3 m (118 in) |
| Shaft and component length | up to 6 m |
| Custom gearboxes | up to 200 tonnes |
| High-speed gearboxes | up to 20,000 RPM |
| Gear types | spur, helical, double helical (herringbone), bevel, worm, internal, planetary |
| Machining | 4-, 5- and 9-axis, mill-turn, wire EDM, cylindrical and centerless grinding, thread whirling |
| Heat treatment | hardening, tempering, surface treatments |
| Inspection | CMM, gear geometry and profile, surface finish, hardness, NDT |
| Materials | 4140, 4340, 8620 and other alloy steels, stainless and duplex, tool steels, bronze, titanium, Inconel |
How an OEM program with Euro Gear works
- Drawing review. We review the drawing for manufacturability and confirm material, heat treatment, accuracy standard and inspection before quoting.
- Quotation. Price per quantity break, delivery terms and the documents that will ship with the parts.
- First article. The first part is fully inspected and reported against your drawing before any series quantity is released.
- Repeat orders. Approved parts are made to the same documented process under your part number, so reorders and spares match the first article.
Quality and documentation
Euro Gear holds ISO 9001:2015 certification (certificate 14144280, issued by QA Certification, valid to September 2029; verifiable at www.irqao.com). Euro Gear is a member of the American Gear Manufacturers Association (AGMA).
Material certification, dimensional and inspection reports, traceability records and test bench reports are supplied as specified in the quote.
What to send with an RFQ
- Drawing (PDF and STEP if available) or a sample part
- Quantity per order and per year
- Material and heat treatment, if specified
- Accuracy standard on the drawing (AGMA 2015, ISO 1328 or DIN 3962): we confirm at quotation whether we can meet it
- Material certificate type required (for example EN 10204 3.1)
- Delivery location and required date
Common questions
- Do you make mill pinions to the OEM drawing?
- Yes, and to the existing girth gear when the drawing is not available.
- Can you supply spares under our part numbers?
- Yes. Approved parts are made to the same documented process under your part number.
- Do you repair the gearboxes too?
- Yes. We rebuild gearboxes of all major makes, which also gives your service team a local repair option.
Request a quote
Send the drawing, model or a sample part with quantities and the delivery location.
