Parts we make for paper machinery builders
- Press, dryer and calender section drive gearing
- Refiner and pulper drive parts
- Winder and reel drive gears
- Roll journals and drive shafts
- Replacement gearboxes for machine rebuilds
Why it fits
- Low volumes and one-offs for rebuild projects
- Shafts up to 6 m and gears up to 3 m
- Reverse engineering for legacy machines
- Close to the Quebec and Ontario paper machinery cluster
For rebuilds as well as new machines
When a section is rebuilt, the drive parts are often older than the drawings on file. We make them from your drawings or from the parts removed during the rebuild.
Capacity at a glance
| Capability | Range |
|---|---|
| Gear diameter (hobbing and grinding) | up to 3 m (118 in) |
| Shaft and component length | up to 6 m |
| Custom gearboxes | up to 200 tonnes |
| High-speed gearboxes | up to 20,000 RPM |
| Gear types | spur, helical, double helical (herringbone), bevel, worm, internal, planetary |
| Machining | 4-, 5- and 9-axis, mill-turn, wire EDM, cylindrical and centerless grinding, thread whirling |
| Heat treatment | hardening, tempering, surface treatments |
| Inspection | CMM, gear geometry and profile, surface finish, hardness, NDT |
| Materials | 4140, 4340, 8620 and other alloy steels, stainless and duplex, tool steels, bronze, titanium, Inconel |
How an OEM program with Euro Gear works
- Drawing review. We review the drawing for manufacturability and confirm material, heat treatment, accuracy standard and inspection before quoting.
- Quotation. Price per quantity break, delivery terms and the documents that will ship with the parts.
- First article. The first part is fully inspected and reported against your drawing before any series quantity is released.
- Repeat orders. Approved parts are made to the same documented process under your part number, so reorders and spares match the first article.
Quality and documentation
Euro Gear holds ISO 9001:2015 certification (certificate 14144280, issued by QA Certification, valid to September 2029; verifiable at www.irqao.com). Euro Gear is a member of the American Gear Manufacturers Association (AGMA).
Material certification, dimensional and inspection reports, traceability records and test bench reports are supplied as specified in the quote.
What to send with an RFQ
- Drawing (PDF and STEP if available) or a sample part
- Quantity per order and per year
- Material and heat treatment, if specified
- Accuracy standard on the drawing (AGMA 2015, ISO 1328 or DIN 3962): we confirm at quotation whether we can meet it
- Material certificate type required (for example EN 10204 3.1)
- Delivery location and required date
Common questions
- Do you work for machinery builders or for mills?
- Both. This page is for machinery builders; mills see our pulp and paper repair page.
- Can you make a gearbox to replace an obsolete section drive?
- Yes, built to fit the existing mounting and shafts.
Request a quote
Send the drawing, model or a sample part with quantities and the delivery location.
