Who we work for
- Machine builders that need a second source or overflow capacity for drive components
- OEMs with parts too large for their regular gear supplier: gears to 3 m, shafts to 6 m
- Aftermarket and service departments supplying spares for machines already in the field
- European manufacturers that want a North American source for their installed base
What we make to drawing
- Spur, helical and double helical gears and pinions
- Bevel gears, worm and wheel sets
- Internal gears, ring gears and planetary stages
- Gear shafts, splined shafts and long shafts to 6 m
- Complete custom gearboxes up to 200 tonnes
- High-speed gear units up to 20,000 RPM
Why equipment manufacturers use an independent gear shop
Euro Gear is an independent company, not part of a gearbox group, so your drawings stay with a supplier that is not owned by one of your competitors. We are set up for low volumes and large parts, and when a part has no drawing we reverse engineer it from the worn component.
Capacity at a glance
| Capability | Range |
|---|---|
| Gear diameter (hobbing and grinding) | up to 3 m (118 in) |
| Shaft and component length | up to 6 m |
| Custom gearboxes | up to 200 tonnes |
| High-speed gearboxes | up to 20,000 RPM |
| Gear types | spur, helical, double helical (herringbone), bevel, worm, internal, planetary |
| Machining | 4-, 5- and 9-axis, mill-turn, wire EDM, cylindrical and centerless grinding, thread whirling |
| Heat treatment | hardening, tempering, surface treatments |
| Inspection | CMM, gear geometry and profile, surface finish, hardness, NDT |
| Materials | 4140, 4340, 8620 and other alloy steels, stainless and duplex, tool steels, bronze, titanium, Inconel |
How an OEM program with Euro Gear works
- Drawing review. We review the drawing for manufacturability and confirm material, heat treatment, accuracy standard and inspection before quoting.
- Quotation. Price per quantity break, delivery terms and the documents that will ship with the parts.
- First article. The first part is fully inspected and reported against your drawing before any series quantity is released.
- Repeat orders. Approved parts are made to the same documented process under your part number, so reorders and spares match the first article.
Quality and documentation
Euro Gear holds ISO 9001:2015 certification (certificate 14144280, issued by QA Certification, valid to September 2029; verifiable at www.irqao.com). Euro Gear is a member of the American Gear Manufacturers Association (AGMA).
Material certification, dimensional and inspection reports, traceability records and test bench reports are supplied as specified in the quote.
What to send with an RFQ
- Drawing (PDF and STEP if available) or a sample part
- Quantity per order and per year
- Material and heat treatment, if specified
- Accuracy standard on the drawing (AGMA 2015, ISO 1328 or DIN 3962): we confirm at quotation whether we can meet it
- Material certificate type required (for example EN 10204 3.1)
- Delivery location and required date
Common questions
- Do you build to customer drawings?
- Yes. Build-to-print work for equipment manufacturers is the core of this service. We review the drawing before quoting and raise any manufacturability questions at that stage.
- What quantities do you make?
- From one-off prototypes and spares to low-volume series. Large gears and long shafts are typically ordered in small quantities, and that is where we are strongest.
- Can you supply European customers?
- Yes. Canadian-made gears and gearboxes enter the EU duty-free under CETA when the origin statement is on the invoice, and delivery terms are agreed per order.
- What if there is no drawing?
- We reverse engineer from the part: geometry, fits, material and heat treatment are established from the component and its mating parts, then a drawing and the replacement are produced.
Request a quote
Send the drawing, model or a sample part with quantities and the delivery location.
