Parts we make for hydro and power OEMs
- Speed-increaser gears for small hydro
- Wicket-gate and governor drive gearing
- Gate hoist and crane gearing at dams and powerhouses
- Large shafts and couplings
- Replacement gearing for refurbishment of mid-century units
Why it fits
- Single pieces and very small batches
- Large diameters and long shafts
- Reverse engineering when original drawings are lost
- Located in Quebec, one of the largest hydro fleets in the world
Refurbishment projects
Refurbishing older units often means replacing gearing nobody has made in fifty years. We measure the original, establish the geometry and make the replacement to suit the existing assembly.
Capacity at a glance
| Capability | Range |
|---|---|
| Gear diameter (hobbing and grinding) | up to 3 m (118 in) |
| Shaft and component length | up to 6 m |
| Custom gearboxes | up to 200 tonnes |
| High-speed gearboxes | up to 20,000 RPM |
| Gear types | spur, helical, double helical (herringbone), bevel, worm, internal, planetary |
| Machining | 4-, 5- and 9-axis, mill-turn, wire EDM, cylindrical and centerless grinding, thread whirling |
| Heat treatment | hardening, tempering, surface treatments |
| Inspection | CMM, gear geometry and profile, surface finish, hardness, NDT |
| Materials | 4140, 4340, 8620 and other alloy steels, stainless and duplex, tool steels, bronze, titanium, Inconel |
How an OEM program with Euro Gear works
- Drawing review. We review the drawing for manufacturability and confirm material, heat treatment, accuracy standard and inspection before quoting.
- Quotation. Price per quantity break, delivery terms and the documents that will ship with the parts.
- First article. The first part is fully inspected and reported against your drawing before any series quantity is released.
- Repeat orders. Approved parts are made to the same documented process under your part number, so reorders and spares match the first article.
Quality and documentation
Euro Gear holds ISO 9001:2015 certification (certificate 14144280, issued by QA Certification, valid to September 2029; verifiable at www.irqao.com). Euro Gear is a member of the American Gear Manufacturers Association (AGMA).
Material certification, dimensional and inspection reports, traceability records and test bench reports are supplied as specified in the quote.
What to send with an RFQ
- Drawing (PDF and STEP if available) or a sample part
- Quantity per order and per year
- Material and heat treatment, if specified
- Accuracy standard on the drawing (AGMA 2015, ISO 1328 or DIN 3962): we confirm at quotation whether we can meet it
- Material certificate type required (for example EN 10204 3.1)
- Delivery location and required date
Common questions
- Can you work to the refurbishment schedule of an outage?
- Tell us the outage date at enquiry. We plan to it and say honestly whether it is achievable.
- Do you need the original drawings?
- No. They help, but we can work from the part.
Request a quote
Send the drawing, model or a sample part with quantities and the delivery location.
